Mikrotik CRS518-16XS-2XQ-RM network switch Managed Fast Ethernet (10/100)

SKU
CRS518-16XS-2XQ-RM
£1,792.44 £1,493.70
In stock
A 100 Gigabit switch for enterprise networks and data centers
As our 100 Gigabit product family grows, the time has come to introduce a serious enterprise-level switch. A switch that is up for the challenge when the CRS504 port density is just not enough. Introducing the spectacular CRS518-16XS-2XQ!

With 2x 100 Gigabit QSFP28 ports and 16x 25 Gigabit SFP28 ports, this is the perfect cost-effective addition to any enterprise network or data center. And with dual-redundant hot-swappable power supplies and fans, you won’t have to worry about unnecessary downtime.

Here’s a real-life setup – similar to the one we’re using in our office:

At the top, you could place two flagship CCR2216 routers to provide the main connectivity and routing. Then a blazing-fast 100 Gigabit connection leads to three CRS518 distribution level switches. This is where all the magic happens. The CRS518 switches connect every access level device to the main network, deal with traffic filtering, and network policy enforcement. And they handle all that with grace and dignity – thanks to the fantastic Marvell Prestera Aldrin2 switch-chip. The same chip you’ve seen in our flagship CCR2216 that did wonders with L3 Hardware Offloading.

The 25-gigabit ports are backward compatible with 10 Gigabit and 1 Gigabit SFP devices. Mix and match as you need!

The two hot-swap power supplies support a high input voltage range: 100-240V. The board itself uses up to 45W of power, while the total maximum power consumption goes up to 77W with all the attachments. It can be a bit more power-hungry than the CRS504, but you would be too if you had 16x 25-Gigabit ports, wouldn’t you?

Our 100 Gigabit product family keeps growing: switches, routers, cables, and QSFP28 modules. If you want real speed and ultimate flexibility for the best price on the market – you want MikroTik!

Nothing can stop this switch: it supports VLAN (802.1Q, 802.1ad), L3 hardware offloaded routing, ACL, LACP, MLAG, Jumbo frames, IGMP/MLD snooping, and so on. Keep your RouterOS up to date and enjoy the real power of CRS!
SKU CRS518-16XS-2XQ-RM
EAN 4752224007438
Manufacturer Mikrotik
In Stock Y
Technical details
Processor frequency650 MHz
Mean time between failures (MTBF)200000 h
Rack mountingYes
Built-in processorYes
Management features
Switch typeManaged
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity1
Basic switching RJ-45 Ethernet ports typeFast Ethernet (10/100)
Console portRJ-45
QSFP28 ports quantity2
SFP28 ports quantity16
USB Type-A ports quantity1
Network
10G supportYes
Data transmission
Switching capacity1200 Gbit/s
Certificates
CertificationCE, EAC, ROHS
Memory
Internal memory64 MB
Flash memory16 MB
Design
International Protection (IP) codeIP20
CertificationCE, EAC, ROHS
Rack mountingYes
Number of fans4 fan(s)
Performance
Processor frequency650 MHz
Mean time between failures (MTBF)200000 h
Internal memory64 MB
Flash memory16 MB
Processor manufacturerQualcomm
Built-in processorYes
Processor modelQualcomm Atheros QCA9531
Operating system installedRouterOS
Power
Power consumption (max)95 W
Power supply includedYes
AC input voltage100 - 240 V
AC input frequency47/63 Hz
Power consumption (typical)45 W
Power sourceAC
Operational conditions
Operating temperature (T-T)-40 - 70 °C